Monographs: Pharmaceutical substances: Ethylcellulose (Ethylcellulosum)

Chemical name. Cellulose ethyl ether; CAS Reg. No. 9004-57-3.

Description. A white to light tan, free-flowing powder.

Solubility. Practically insoluble in water, glycerol R, and propylene glycol R. When containing less than 46.5% of ethoxy groups, it is freely soluble in tetrahydrofuran R. When containing not less than 46.5% of ethoxy groups, it is freely soluble in ethanol (~750 g/l) TS, methanol R, toluene R, and ethyl acetate R.

Category. Film-coating agent; tablet binder; release-rate modifier for oral formulations.

Storage. Ethylcellulose should be kept in a well-closed container.

Labelling. The designation on the container of Ethylcellulose should state its viscosity.

Requirements

Definition. Ethylcellulose is an ethyl ether of cellulose.

Ethylcellulose contains not less than 44.0% and not more than the equivalent of 51.0% of ethoxy (-OC2H5) groups.

Identity tests

A. Dissolve 5 g in 95 g of a mixture by mass of 80 parts of toluene R and 20 parts of ethanol (~750 g/l) TS; a slightly yellow, clear, stable solution is produced. (Keep the solution for test B.)

B. Pour a few mL of the above solution onto a glass plate and allow the solvent to evaporate; a thin, though continuous, clear film is formed. Remove the film from the plate; it is flammable.

Heavy metals. Use 0.5 g for the preparation of the test solution as described under 2.2.3 Limit test for heavy metals, Procedure 3; determine the heavy metals content according to Method A; not more than 40 μg/g.

Sulfated ash. Not more than 4.0 mg/g.

Loss on drying. Dry at 105 °C for 2 hours; it loses not more than 30 mg/g.

Assay. Carry out the assay as described under 2.9 Determination of methoxyl, using about 0.05 g, previously dried and accurately weighed.

Each mL of sodium thiosulfate (0.1 mol/l) VS is equivalent to 0.7510 mg of (-OC2H5).

to previous sectionto next section